High-quality semi-finished products, straws, tubes and sleeves as a solution for your technical challenge
Are you looking for tubes with the right diameter, length or wall thickness for your application?
...or tubes for your individual application with customised dimensions and low tolerances?
...or an inexpensive customised assembly for your application?
Then you've come to the right place! We are your experts in the individual realisation of all your tube requirements ;-)
Our speciality: We come from the PP plastics sector!
As one of the leading specialists for drinking straws since 2006 and our high-performance extruders, we are also able to produce tubes, sleeves and much more for you today, including in plastic!
We supply a large number of customers with customised products, individually tailored to their technical application.
We will also find a solution to your challenge. Within a few weeks, we will deliver your personalised, individually produced drinking straw, produced in Germany and the EU and, of course, with a food authenticity certificate.
We will also find a solution for your challenge! Challenge us!
Customised products made of PP
Possible diameters and lengths
Technical data:
Important: There is nothing that does not exist! Talk to us, we look forward to your challenge.
Length: 50 - 4,000 mm
Diameter: Length up to 300 mm: Ø 3.0 - 12 mm (note: higher tolerances from Ø 10.0 mm) Length up to 600 mm: max. Ø 7.5 mm Length from 600 mm: max. Ø 6.0 mm
Wall thickness: 0.14 - 0.25 mm (standard for drinking straws: 0.18 - 0.20 mm) Greater wall thicknesses must be technically tested. Prices and feasibility on request
Tolerances: Length +/- 2 mm, diameter +/- 0.2 mm, wall thickness +/- 0.02 mm
Variants: Sharpened on one side, with spoon cut, with bend (flexible centre piece), Tubes printed, individually wrapped in foil or paper, printed wrapper. Variants on request
Colours: Standard colours such as black, transparent and basic colours. Individual colours approximately according to Pantone possible
We will also be happy to check the technical possibilities for realising your project. Give us a call!
We produce for you:
Production of your drinking straw in individual colour/Pantone
Straws, tubes and sleeves with customised lengths, diameters and wall thicknesses (possible ranges depending on the material)
Principle: Extrusion (exception paper tubes: spiral winding)
Very tight tolerances possible
Very high and consistent quality thanks to the use of our precise extruders and winding machines, which are optimised for the cost-effective production of high-quality tubes in quantities of millions
All customised products can be realised from 100,000 pieces (often less than one pallet)
Production capacity: 32 million units per week
Packed in standard or customised units = very economical packaging
Additional printing possible, 1 to 4 colours, using direct printing process
Also possible: tubes individually wrapped in PP film / paper
Delivery time: approx. 4-6 weeks. For larger quantities, delivery of your goods by instalments
Pattern:
We will be happy to provide you with samples in advance.
Samples at cost, depending on expenditure and material
Delivery time for samples: approx. 2-6 weeks, depending on capacity utilisation
Application examples:
Tubes in individual length, diameter, wall thickness or colour (approximate pantone possible)
Protective tube
Guide tube
Insulating sleeves
Spacer sleeves
Transport tubes
Air guide tube
Saliva tubes for laboratory applications
Other applications of permanently installed tubes as components in your machine or product
and much more. ...
Example application: Protective sleeve
Example application: Protective and transport sleeve
Example application: Guide tube
Example application: Tubes bundled into a package
Example: Flexible centre piece "kink" in the tube
Example of customised end shape of the tubes - here so-called "spoon cut"
Possible materials for your customised production:
Plastic For applications that do not fall under the EU Single-Use Plastics Directive, we continue to offer you the production of tubes made of plastic / PP (polypropylene).
High-quality paper Significantly more dimensionally stable and durable than conventional paper tubes Detailed information on the material can be found here:
Material of our genuine BioHalmHeat-resistant, dimensionally stable, home compostable. You can find detailed information about the material here:
How do you reduce assembly times, rejects and complaints with a component that weighs hardly anything but delivers measurably more performance? Our Plastic sleeves are the smart choice for optimising your production processes. These thin-walled, extruded plastic pipes are typically made from PP, PE or special engineering plastics to meet your specific temperature and media requirements. Thanks to their flexible use as spacer, protective or insulating elements, they are ideal for numerous applications. Whether in electrical engineering for insulating screws and bolts or as spacers for guiding and protecting conductor tracks. Our sleeves offer an efficient solution in every situation. They also fulfil crucial functions in mechanical and plant engineering, such as spacing, edge and collision protection and ensure smooth guidance and vibration decoupling. In laboratory and medical technology as well as the automotive industry, they are indispensable as precise and lightweight components for quality-critical processes. We offer you Customised dimensions and processing-optimised ends so that you always get the ideal solution for your requirements.
Electrical insulation and safety: Our plastic sleeves are non-conductive and offer optimum protection against short circuits, leakage currents and contact corrosion. They are ideal for insulating screws, bolts, bushings or conductor tracks.
Precise spacing and dimensional accuracy: Benefit from defined distances that ensure reproducible assembly quality. We offer tight tolerances suitable for series production and geometries that can be specified exactly according to your requirements, such as inside diameter, outside diameter and length. Clean cut edges and deburring reduce insertion forces and prevent damage.
Low weight with high functionality: Our cores are easy to handle, which means less inertia and lower shipping costs. Despite their low weight, they are sufficiently rigid and robust for many industrial applications.
Corrosion and chemical resistance: Unlike metal alternatives, our plastic sleeves do not rust and offer good resistance to moisture and many media thanks to their material. We also provide engineering plastics for higher requirements.
Economic efficiency in series production: The extrusion process enables the production of large quantities at attractive unit costs. We support your short time-to-market with fast samples and predictable series delivery times. Series-compliant assembly and optional individual packaging offer clean and automatable handling.
Wide range of variants and individualisation: We supply dimensions as required so that the inside diameter, outside diameter and length are precisely tailored to your application. Choose from end geometries such as straight cut, deburring, pointing or spoon cut for assembly optimisation. In addition, we offer optional segmented and flexible areas for radii as well as a wide range of colours for marking, including standard colours or specific corporate identity colours.
Exclusively printed and refined drinking straws
Customised drinking straws with company name, homepage or logo
Direct printing
Your exclusively printed drinking straw with your company name, homepage or logo.
To provide you with an optimised experience, we use technologies such as cookies to store and/or access device information. If you consent to these technologies, we may process data such as browsing behaviour or unique IDs on this website. If you do not give or withdraw your consent, certain features and functions may be impaired.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service expressly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that have not been requested by the subscriber or user.
Statistics
Technical storage or access for statistical purposes only.Technical storage or access used solely for anonymous statistical purposes. Without a subpoena, the voluntary consent of your Internet service provider or additional records from third parties, the information stored or accessed for this purpose alone cannot generally be used to identify you.
Marketing
The technical storage or access is necessary to create user profiles, to send advertising or to track the user on a website or across several websites for similar marketing purposes.
English (UK) 
Deutsch